Search found 57 matches

Hi ALl,

I have been attempting to complete a design using AN0,1,2 and 3.
I have the following setup:

setup_adc_ports(AN0_TO_AN3|VSS_VDD);//AN0
setup_adc(ADC_CLOCK_DIV_32) ...

Thanks you all for your great responses.

I have succeded using treitmey's method.

Cheers

Mark

Hi All

Does anyone know if it is possible to run several sessions of the siow serial port monitor at the same time? Each one connected to a different prot of course.
If not can anyone suggest an e ...

Hi There,

Try this site, it has everything you need.

Take note, you need both int() statements to make it work.

http://www.loginway.com/custom_char.htm

Cheers

Mark

Hi all,

Take care migrating any code to the 16F886 or 887.
The current testing of these devices with CCS functions appears to be minimal and there are many changes between say the 876 and the 886. ...

sorry, got my versions mixed up. It is an 876a and you will see I have taken care of the comparator disabling.

For the 876A

///////////////////////////////////////////////////////////////////////////
//// Slave1_876.C
//// ...

It had to something simple!

I needed this :
setup_spi(SPI_SS_DISABLED); in the setup.
I had created the project with the PIC Wizard and this did not come through.

Thanks for you help

No joy sorry PCM,

I included this fix but we still have the problem. Out of curiosity I asked CCS Support if they had done any testing on this part in the slave mode. They say not and had just [spam] ...

If I remove the word " slave " from the #use I2c function the bus is allowed to go high and if i use " master " the bus still tries to work but I guess it competes with the real ma ...

I have checked out the two list files and printed the program memory files as symbols. The files seem the same so far. In particular the SSPBUF on the 876 = 0x36 and the SSPCON on the 886 = 0x36.
Thi ...

The pullups are only on the master pcb, 4k7. I did try fitting extra ones on the slave pcb but as it did not change things I removed them again.

With no PIC all lines stay high

Witha PIC program ...

I have three pcbs, One has an 876 onboard and two have 886's.
This is a very common board in our fleet and well tested. I get the same results with both 886 boards.

Hi PCM,

If I run the 886 by itself it will blink it's LED quite happily.
Both tests were completed with 4.047
both PICs are supplied from the same 5 volt supply

The problem comes when , after ...

Here is my version of the Slave code

#include <16F886.h>

#device adc=8

#FUSES NOWDT //No Watch Dog Timer
#FUSES HS //High speed Osc (&g ...