Search found 49 matches

Is your problem fixed?

I have support request in with CCS right now with the same issues with most of the PIC24 chips I am trying to use. All are failing to verify.

PIC24EP64GB202
PIC24EP512GU810
PIC24FJ128GA010

I ...

#use delay(xtal=10m, clock=40Mhz)

Not sure if the PLL can up the xtal by 14x?

#use delay(clock=20000000)

I see that your #fuse line is commented out I don't think the clock option will set the HS fuse

The clock option in #use delay should only be used with xtal o ...

No SPI support ATM this time. It would be easy to add. Do you have working drivers for the display?

Do you have a url with info on the display you have?

Project updated for ILI932x based Color GLCDs

Video file added that shows what the LuaLCD program shows on the display when it is running

You may be on to something there.

Read all of the font data in for the current row and write them as a bitmap could maybe equal up to a 50% speed up.

draw bitmap 16bit color full screen from USB ...

Yes, That would be my guess if your wiring matches my defines I posted in the readid() test.

Using this Color TFT display
// standard ascii 5x7 font

const unsigned char font[] = { // size is 1275
0x00, 0x00, 0x00, 0x00, 0x00,
0x3E, 0x5B, 0x4F, 0x5B, 0x3E,
...

My full driver for my picUSBtoGLCD runs using

#fuses NOWDT,NOPROTECT,NOLVP,NODEBUG,VREGEN,PUT
#use delay(crystal=20M, clock=48M, USB_FULL)

What version of CCS C do you have?

I ca ...

Is that GLCD 5V safe? The PIC is outputting 5V to it.

Disconnect DB0-7 from ground when the pic gets to the while line not before.
You should still get the 0x9300 out of it. Then measure pins d0-d7.

You need to leave them connect to ground so the wri ...

I cant get the page for your GLCD to load to look at the info on it

It seems to be in 16bit mode, does it default to that mode? What I remember from the quick look I give it the other day you had ...

Yes this could be a timing issue. I will think about that more if the following code for you doesn't work. I know this code that I am posting is working I just tested it 2 times once without commentin ...

sorry I forgot something, I set port to all output in my glcd_init function.

Do a SET_TRIS_B( 0x00 );

somewhere in your main before calling readID.

I think the tris defaults to 0xFF which is ...