Search found 29 matches

Thank you very much for your comments.

Ttelmah, I am using a flexible epoxy resin, specially formulated to encapsulate electronic circuits.

I am not doing any previous cleaning before encapsulat ...

I have an automotive development using MPU-6050 mounted on GY521 modules.

I am driving the MPU-6050 using a PIC24EP512GU806 Pic micro at 3.3v.

For this reason I am bridging in the GY521 module ...

I am working on a project with PIC24EP512, which I need to be able to "speak" in Spanish, "reading" ASCII text sent by a serial interface.

To achieve this, I was testing with an ...

Thank you very much everyone for your comments, I just bought the Brush Electronics libraries, I will start working with them.

Temtronic, that board is interesting, but in my case as I am working w ...

Thank you very much temtronic for your response

I understand the advantages of having an OTG and pendrive, but unfortunately the cost of this solution is not compatible with the final cost of this ...

Thank you very much Ttelmah for your response, always collaborating with your wise opinions

It would not be a problem to limit the maximum volume size to 32 Gb, so as not to leave the FAT32 standar ...

For a development that I am doing with PIC24EP512, I need to incorporate an SD memory, of the current ones in the market (4 to 64 GB SLC) , to exchange files with Windows PCs using an SPI port.

I ...

Thanks for your answer.

Unfortunately, in my user app, restart_cause always responds 16 (unknown).

CCS recommends using restart_cause immediately at the beginning of the main:

value = restart ...

Finally I came to the conclusion that it is not possible, due to errata on the chip, to protect the code using bootloader in the aux flash memory

This was a comment from CCS Support with the same o ...

I have developed a user App(in general segment flash) and a bootloader (in auxiliary flash memory) that works well

Compiler PCD v5.085 Processor PIC24EP512GP806

After a reset, the first one tha ...

CCS support gave me a clue why the bootloader does not start when the auxiliary memory is protected, telling me that this problem is mentioned in the chip's errata sheet.

31. Module: Auxiliary Fl ...

Ttelmah, Thank you very much for your help and your prompt response.

I understand what you are telling me, but I do not understand how I should do this code protection.

The only way I found in t ...

I have developed a CAN bootloader that works very well, loading the user application that also works well.

The bootloader is in the auxiliary flash memory, while the user program is in the general ...

Thank you very much for your response (you are always willing to help everyone Very Happy

)

I already sent the case to CCS Support.

I am developing a bootloader based on the ex_pcd_aux_bootloader.c example with PCD 5.085 compiler.

The problem is that the ICDU debugger does not work anymore when the following options are placed. ...