Search found 7 matches

Sorry Ttelmah there was a misunderstanding. You were right, it was indeed one of three problems needing to be solved. With the right equipment I found I have reversed the wiring of the scl and sda, an ...

The ADC is outputting fine. i check by changing it to a optimal speed recommended by the data sheet and gave me the same results.

I'll be at the shop today so i know i'll have better test equipmen ...

we have progress!! Very Happy

OK so i'm now pretty sure its the slave side that i'm going to need to fine tune. I know for sure that there is communication and that a values is sent.

the code is ...

Here is what i have done so far.

1. changed the Quotes.

2. checked the resistor values to be between 10 k and 6k

3. i looked over the slave ssp isr and found 3 logic errors.

4. removed fas ...

Originally i was using an int in the place of the "a" so that it looked like this

int data;
i2c_start();
i2c_write(0xa0);
i2c_write(0x00);
...

try changing the place holder and see the result in hex. it might be play with the value. check if the value is not rolling over when you multiply.

Hello i have been at this for a bit and have not found what might be my problem. I had searched up what others had done and turn out empty there too. i'm using v. 4.120 of the ccs c and real world app ...