Search found 37 matches

Hello all
Is it possible to create a C library code, so we can use the functions in it, but we cant let someone else see the source of the code.
Is that possible with ccs ?

Regards

Hi all
I could not find how to calculate one byte checksum to communicate with laser sensor via usart.
The laser sensor accept 4 bytes and one byte check sum.
There is an example in the manual: ...

Any idea about this issue?

Sorry for the late reply.

Here the routines that I use for saving and loading, I use pointers.

void Write_Float_ram_low(int16 address1, float data1)
{
int8 i;
for( ...

Hi everyone ;

I have problem with saving and reloading floating points with CCS v4.106
I am saving data in external Static RAM as 4 bytes and when i read it back i get a problem of 0.01 changing ...

Thank you Ttelmah
The problem is solved.

Before using this setup, I should choose the correct channel in the communication register.

setup_adc_device( ADC_SELF, ADC_GAIN_1, ADC_UNIPOLAR, ...

Hello everyone

I have connected REF+ to 2.5V
REF- to gnd

AN2- to gnd

Then on AN2+ I put voltage from 0 to 2.5 that through a POT.

So when the voltage on AN2+ is 2.5v I should get a read ...

Sorry for late reply, I was out of the city.

When I returned back, it works as expected. I don't know what was wrong ! Thats strange.
However thank you all for help.
Have a nice day.

thank you

//////////////////////////////////
#byte ADCON1 = 0X09F
//********************************
#define digit0 PIN_A2
#define digit1 PIN_A1
#define triac PIN_A3

#define butto ...

Thank you ;
down is a simple program for 16f819 ; I simulated in MPLAB; Proteus and is real circuit ; PORTA always zero ! And portb.6 and portb.7 always zero .
what did I miss ; any problem in my ...

Stack used: 3 worst case (out of 7 total available)
What is the case for 16f819 ? I still could not use portb.6 and portb.7 as output .
I configured it as NOLVP; what could be the problem ?

Tha ...

Thank you for reply
I tested in proteus, MPLAB and real circuit: Proteus gives a stack over flow message.
I moved to 16F819 with the same circuit;
it seems I that can't figure out B6 and B7 as h ...

Hi all
Here down my code. I could don't see why I am getting stack overflow.
When I close the line set_digits() in while in main there is no problem.
Could you guide me please ?

Regards

# ...

any suggestion ?

Hi all
I have written a code for 18f8722, 70% of the total memory; I looking now for a free bootloader. I tried the bootloader down:

///////////////////////////////////////////////////////////// ...