Search found 19 matches

Hello,

What is the sytax for CCP/CAPTURE interrupt : #INT_xxx in dsPic33 ?

#int_ccp doesnt exists in the *.h file .

Thanks

Hi,

I'm using PIC16F88 with ex_dtmf.c .

What is the correct clock settings for 4Mhz internal clock in order to get the correct dtmf tones? and how do i calculate it?

I know that for 20Mhz the ...

Hello,

Assume using CCS fft.h :

I would like to sample an axis of the L3GD20 Gyro and output the fft result.

My question is: what is the sample rate Fs which i should use,(then i can calculat ...

Hello,

While debug the ccs code in MPLAB i got "RESERVED MEMORY" in the watch value area.
What is the general reason ? and how can i fix it?

It happens with PIC16F688 and PIC24H, i as ...

guys,

thank you all, but its a hardware problem of the I/O ports, (after checked with ICE)

I tried return(0), no help.

Even if there is no loop in the visual_on(), the function dont return to main.

Hi,

Why do the Visual_on () function is endless and dont return to main after finish the 'for' loop ?

#include <10F222.h>
#device adc=8

#FUSES NOWDT //No Watch D ...

ok,

but my question was what is the best way in coding in order to follow the count increament.

Hi,

I'm feeding PIC10F222 ADC input with increasing voltage.

What is the correct way to make sure, that the voltage is really increase in code ?

For example: input voltage in first sample ...

hi again,

Ok, how do I know how many MIPS are in the PIC10F222 ? (I assume MIPS is fixed per chip).

Is this line is enough for declaring the frequency ? : "#use delay(clock=4000000)". ...

Hello ,

There is something I don't understand regard the following:

When I set: #use delay(clock=4000000) then the code (routines) go less faster then if I set: #use delay(clock=1000000).

...

Hello again,

There is something I don't understand regard the following:

When I set: #use delay(clock=4000000) then the code (routines) go less faster then if I set: #use delay(clock=1000000).
...

Hi,

I have two inputs for each ADC channel.

What is the correct way to declare : "set_adc_channel();
" i.e. to choose which ADC channel to use in each wanted input: 'Temp' and 'Value' ...

Hi,

The voltage table is regard working with PIC10F506 emulator, i really don't understand why i get PIC10F222 so tight values.

Thanks,
Eyall

Hi,

Sorry for my late response.
I'm measuring a bend sensor, the voltage change is from ~1.5v to ~2.2v with error of ~0.2v .
It take a maximum of 1 second for this gap.(min to max value)
So, is ...