Search found 20 matches

The #use delay gets pointed to, when you are in anything using a delay.

The function uses the ADC to generate values to seed the random number generator. There is a note that there will be problem ...

Debug inside this function, in the Helpers.c file:
GenerateRandomDWORD()
There are a couple places in there where it could possibly get stuck.

It's enters in a while loop, that presumably ...

Hello,

I have tried to make the pic18f87k90 to talk with the enc28j60 and it doesn't works.

I am using the ccs c tcp/ip stack and debugging with mplab x I find that gets stuck on StackInit in li ...

Sorry for my bad response. I don't know why I put that.

I refer that the code didn't worked with a constant string, but with the last response of PCM programmer It worked.

Many thanks for your h ...

Thanks for your answers.

Here is some examples of how I call that function:

muestra_mensaje("HI");
muestra_mensaje("\nHI");

So that code doesn't work if ...

Hello,

I am using now a PIC16F877A and the flex_lcd driver. I am using the lcd to display a text when received one of the 14 commands that I receive from the serial port. Parsing and receiving the ...

Thanks for your answers. I finally decided to re-think the project and I will use an enc28j60 and ethernet switches. This will make the installation cost of the network cheaper than installing a new p ...

Thanks for all your answers. Sorry, I didn't mention that I was going to use rs232 to rs485 converter (which I actually don't remember the model, I will update when I have it). But also, I talked to a ...

24 serial ports ? That's 48 pins...OK, it _can_ be done using that PIC BUT what speed are the serial ports? Do you need both TX and RX for every port?
All the software' ports must be 'polled', and th ...

Hello,

I need to manage a lot of serial port with a 18F87K22. I know that it has 2 hardware uart and up to four software uarts. But I need about 24 serial port. I haven't found how to change the u ...

The problem is that your 'premise' is wrong.

You are starting from the flexible driver, so (say):

short int ALL_ROWS (void)
{
if (input (row0) & input (row1 ...

re: ...It's a standard black keypad..

Hopefully you've 'rung out' AKA decoded which pins do what function. There is NO 'standard' for keyboards. I have 4 'standard black keyboards' in a drawer here ...

Please post a 'link' to the KPD schematic or mfr/make/model....

Jay

It's a standard black keypad. I don't have the model

Put 10K pullup resistors on all the row pins.

This circuit is what you need on each of the row pins:

+5v
|
<
> 10K ...

Hello,

I am having trouble with a 3x4 keypad. I am using the flex_kbd driver inverted by me, because I am using pull down resistors instead of pull ups.

Here is the code of flex_kbd:

////// ...