Search found 11 matches

Hi All,
I use PIC24FJ64GA004 for an automation project. The board includes uC, Nordic nRF905 tranceiver, Micron m25pe20 serial flash memory and offline buck converter. Board has relatively high EMI b ...

Hi All,
I have trouble with SPI modules on PIC24FJ64GA004. I use two SPI in my project with software CS. One for external memory, one for nordic tranceiver chip.
Here is my setup for spi modules:
S ...

Yea i understand that Smile

sorry for foolish question :p

daf--k

setup_adc_ports() sets only pin's analog feauture and set_adc_channel() sets the sampling channel. I don't know that i have to use set_adc_channel(), i suppose that it is like STM32 devices. ...

By the way, AN4 is sda and AN5 is scl for i2c module. Is it relevant ?

Here is my config code:
//! setup_comparator(0x0003);
//! setup_vref(false);
setup_comparator(NC_NC_NC_NC);
//! setup_adc_ports(sAN4, VSS_VDD); ...

Hi,
I want to use 23rd pin as an analog input.
I did use analog input with AN0 before. But this pin always return zero analog value.
I think it is about I2C.
Do you have any idea about it.
Datas ...

I think, only changing nRF module solves the problem. There is still Acknowledge problem. I have another job these days. When i solve it correctly, i will be post it here
Thanks

i did solve the problem, somehow. But still it can't use autoack properly. Every transmitting is return a datasent irq just like noack:)
I hope that i will be solve this :p
My next problem about pac ...

Yes, i tried that. Logically, pipe0 auto ack must be off, but i need auto ack for unicast messaging. When i set en_aa 0b00011110 every third message is lost on the air. Do you have any idea about that ...

Hi all,
I have a complicated project by using nRF24L01+ chip and this driver for ccs c. I am a bit confused about something. Here it is:
I use pipe0 as a broadcast and pipe1 as unicast. I have lots ...