Search found 8 matches

Guys, I appreciated a lot your comments! I figured out what was wrong.

Basically, by the begining of the project, we wired TX<>TX and RX<>RX, which I thought I could set it right throug ...

Thanks for the replies!

I came back with the same problems :(
Okay, first things first. I got rid of some fuses that seem useless for my application. Actually, I got 'em copied and pasted from ano ...

Here I go again to the datasheet :P I'm a begginer at this, that's why I messed up with the fuses. I will try to make them right then.

Just one question regarding what you just said: how much delay ...

I've looked at the example ex.sisr.c and I came up with the code which can be found below.

I still can see with my osciloscope data leaving the Pic(PIN_C7) and entering(PIN_C6). However, it's not s ...

Thank you buddy, I'll have a look at the example.

My whole code is on my first post. Previous post was about routines that I was using to get any data

Okay guys, I've done my research and tried different types of codes, for instance:
kbhit() and getc() - it seems here that kbhit returns true, but i can't get any data

while(1){
...

Thanks Ttelman for you answer Smile

I've done the modifications that you mentioned. Also, I've done the LED tests and they are working fine.

Let's see if I find something about what you said

Hello there,

First of all, I did my research in this forum, but I couldn't find any solution to my problem :(

Alright, I have a breadboard with a pic18f26k20 connected to a bluegiga wt11i-a blue ...