Search found 42 matches

Hi

My PWM output does not seem to work.
I checked with an oscilloscope.

COMPILER : 5.078
PIC : 18F27K40

If someone knows what I'm doing wrong... well help is appreciated.

#include <1 ...

hi,

im using mplab ide-x and see there is not a way to change the eeprom data.
it always returns to oxFF.
is there a way i can predefine eepromdata so when it compiles this eepromdata is set to t ...

Ok understand your info.

The RDA interrupt is exactly doing what you say,
It grabs the single byte from the buffer and stores it inside an array of data.
The data always has a start and stop char ...

OK thank you for this valuable information

I use this global on of interrupt a lot.
So i removed and am testing.

So is it ok to disable a timer interrupt like example below?
To make sure the s ...

OK

so this means this item is solved in new version of compiler?

I will check, double check and triple check my code.

And yes I use disable_interrupts(GLOBAL) and enable_interrupts(GLOBAL) i ...

CCS PCH C Compiler, Version 5.001, 3xxxx 06-okt-16 08:37

Filename: test.c

ROM used: 64362 bytes (98%)
Largest free fragment is 11 ...

hi

Yes you are correct.
I gave less information, so here is more.

PIC : 18F26K22
compiler version : 4.134

You gave me a good hint about the STVREN its actually off.
I try again with this s ...

hi

In my code i have
fprintf(NETWERK,"<II PWM %u %Ld %d>", nPWMValueF, nPreviousPWMValue, nNumber);
data on serial port in good condition is:

II PWM 0 0 36

Sometim ...

hi

PcdWiz is giving me a message
Format string to long.

the Clock speed field is full of
20.000.000,000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 ...

Hello

Thanks for fast reply but you misunderstood my post

The problem in have is that my pin is set to output with the
#use rs232(baud=38400.... code
But never can be set again as analog inpu ...

Hello

Im having troubles with a analog input and RS232

At startup i put

#use rs232(baud=38400,xmit=pin_b5,rcv=pin_a2,stream=EEPROMPORT)
im doing some checks on this port for 5 seconds.

I ...

it was a array error.
pointer out of scope...

So that was the issue

I have added a printf to a serial port on all parts where the variable has been changed.
The problem still remains....

Once i put the function calls on top of the program....
problem gone...
...

Problem seems to be solved:

Placing my function calls above the declaration of the variables seems to remove the problem.

This gives a problem with the variable called in different subroutines: ...

Hi,

thanks for comments

Yes you are correct on delays in isr. it was just a sample i wanted to explain.

Strange thing is now that it is also happening on a 2nd variable
These variables are r ...