Search found 22 matches

hi am using the com20020i arcnet controller in a new design wondered if anyone on here has had any experience with this device.

am unsure about the the bus biasing could do with speaking to someone ...

that happened to me too, then when i re read the mail they sent it said

A full 30-day PCD demo will be available after July 27, 2007 at ccsinfo.com!

and it was the 26th, so i wait for the 28th.

thanks for that pcm.
you woudnt know where i could get one for win-ce, would you ?

hi someone some months back, posted a link to their site
that had a terminal program like hyperterminal, but for a pda.
i now find i need it, but can not find the post.
any idea.

perhaps

else if ( input(pin_b0)==0)

hi
i have been using a software uart, but have now decided to dump it and go for the spi uart from maxim, i also use the i2c bus which i intend to drop as well, and go all spi.

i was hoping that y ...

thanks treitmey

it turns out to be an icd2 problem, it is there and accessible, but icd2
seems to think its a restricted memory location.
and will not display it.

yes i have baudcon bit 3 set.
but it seems to be inaccessible, from icd2 when you view spec func registers
it has '--' in the place of spbrgh.

hello guys.
has anyone noticed that the spbrgh register is non existent on the 18f2680.

i need 1200 baud on the uart on a 8mhz internal clock + pll ( 32 mhz).
and i now find spbrgh is unavailable ...

i am hoping someone can help with this.

i use a software usart to receive data, have tied rcv pin to int1 pin, and i am receiving data ok, my isr for int1 uses fgetc and pushes to a circular que.
...

why not torture them first, with pascal.

are there different flavors of crc16.
its just that i needed crc16 routine to check data coming out of a dallas ds2406 one wire part. so i pulled one off of this forum ( actually pulled 4 different o ...

hi i know this has been discussed before.

but does anyone have the dallas one wire search rom code in ccs c
that i can use straight away, without having to straighten it out first.

i have just checked out the pricing for pcwh its �400
for this amount i obviously get the rtos, i would like an rtos!
but do you still only get 30 days of updates.
i have found from past experience ...

this works
fast=2500000
( 0xfc8=0x02 )
slew rate turned off
vpullup now 2k, didnt have any 1.8k so used 2X1k ( i am using picdem2 board )
ramtron is smd device soldered piggyback onto 18f2680 ( t ...