Search found 22 matches

Hi,
I am trying to communicate to a smart battery BB-2590 using the smbus.
I am using the pic18f97j60 connecting to one of the comm ports on the battery.
I have the i2c setup as:
#use i2c(Mas ...

Does the CCS TCP/IP stack support snmp v3?
if not, then what do i need to do to have the v3 capability?

All software versions are 4.090

I took it out of the interrupt and used your suggestion by putting it in the main loop, this seems to have helped it tremendously.

thank you.

Sorry about the earlier post, compiler version is 4.090
here is the code:

#include "C:\Program Files\PICC\DMM\18F97J60.H"
#device ICD=TRUE
#device adc=10
#use delay(clock=25M& ...

the PIC is supplying the clock.
I have:
SDI
SDO
CLK
MCP_CS --- MCP3909 Chip Select
MCP_MCLR --- MCP3909 MCLR

the MCP3909 is running off a crystal (3.579MHz) for its internal timing used. The ...

the PIC is supplying the clock.
I have:
SDI
SDO
CLK
MCP_CS --- MCP3909 Chip Select
MCP_MCLR --- MCP3909 MCLR

the MCP3909 is running of a crystal (3.579MHz) for its internal timing used. The P ...

void mcp_collect()
{
MCP3909_CS = 0;
ac_v_upper_byte = spi_read2(0);
ac_v_lower_byte = spi_read2(0);

ac_i_upper_byte = spi_read2(0);
...

I am using a PIC 18f97j60 with digital isolators (ADUM3100 for fast switching) to talk to MCP3909.
On the PICC side, it is powered from a different source which is always on. The MCP3909 side is powe ...

Yes, that is my intention.

I am using microchip's demo board: PICDEM.NET 2,
http://www.microchip.com/stellent/idcplg?IdcService=SS_GET_PAGE&nodeId=1406&dDocName=en028217

and using the SPI port 2 from J6 on the board ...

That makes sense using 16 clocks per chip select.
I keep trying the:
setup_spi2(SPI_MASTER|SPI_MODE_3|SPI_CLK_DIV_64);

but the software hangs up at the line:
retval = spi_read2(0);
with the cl ...

#include "C:\Program Files\PICC\ethernet2\18F97J60.H"
#device ICD=TRUE
#device adc=10
#use delay(clock=25M)
#fuses HS
#fuses NOIESO
#fuses NOFCMEN
#fuses PRIMAR ...

Yea, i added the time delays and fixed the 16 clocks per CS, i am also trying to go to DIV_64, but the software hangs up at the first spi_write2, any idea why?

where can i find what's in the funct ...

version is 4.090.

I tried having the SPI_CLK_DIV_64 instead of SPI_CLK_DIV_16 but i wouldnt see anything happening on the bus using the o'scope.

which makes sense because the part is by defualt ...

Compiler version is 4.09.

The pinout is as follows:
PIC18f97j60 ADIS16209
RD5 --> pin 2 Dout
RD4 --> pin 3 Din
...