Search found 10 matches

Hi guys,

I'm trying to implement a V-stamp speech synthesizer driver.

I required to generate the text, then followed by CR or NUL. Was wondering how can I terminate with CR or NUL. Here is my te ...

Hi guys,

I just tested the programme. I used a advanced serial data logger to acquire the data. The problem is while sending the data I monitor the data logger. After the 2 second delay. the data l ...

Thanks PCM programmer and asmallri you both have been a great help.

Thanks guys,

Was wondering. PCM Programmer use Port C Pin 6 and 7. If I want to use Port A pin 2 and pin 3 is this the soruce code?

#include <16F877>
#fuses XT, NOWDT, NOPROTECT, BROWNO ...

Hi,

I'm new in serial communication. I wanted to write a serial test code before I intend to write my program. Here is the test code that I'm writting and I need some pointers. Thanks.

#include ...

Sorry I didn't want to post the full code since it is very long. Here is the whole program code:

#include
#device *=16
#device adc=10
#use delay(clock=4000000)
#fuses XT, NOBROWNOUT, NOLVP, NO ...

Hi guys,

I'm using PIC16F877A with CCS C compiler to develop my program. Initially I used portC and portD but I decided to change to portA and portB but after changing is not working? Can anyone p ...

Hi newguy,

I'm sorry I'm a noob for T6963C controller. I thought I require to modify the code to clear the LCD which is bigger in size.

I'm new in using CCS C compiler so i have a few queries: ...

Hi guys,

I just tested the code and it works Very Happy

But I'm using a 240x120 display

I was wondering what value should I change for 1FFF to clear all the ram value on the screen :

// Cl ...

hi,

just want to know if I'm using Port A.0 as C/D, A.1 as read, A.2 as write, A3 as reset and Port B as data bus, what instruction should i change?

I'm using 16f877a

Thanks