CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
int1 arrays USED to work [SOLVED] - programmer error

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
asmboy



Joined: 20 Nov 2007
Posts: 2128
Location: albany ny

View user's profile Send private message AIM Address

int1 arrays USED to work [SOLVED] - programmer error
PostPosted: Thu Jul 26, 2012 4:31 pm     Reply with quote
this code worked properly back with 4.085 and a few versions after but......

Code:

int1
skipmeK[96]={1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1
,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1};

// This function WORKS in 4.085 - my old baseline compiler for 18f4525
// but FAILS in 4.135 as follows:
// the bits in skipmek STAY ='1 no matter what
// call with t<12 for EZ check

// called with 'prx'=1 SHOULD set 't' bit to 0 
// the 0-12 test printer is to make it EZ to understand what is going bad

void setskipK (int1 prx , unsigned int8 t){
      unsigned int8 q;
            if (prx)  skipmek[t]=0;   // inverts prx
            else      skipmek[t]=1;
            printf("InDeX %u :",t);
         for (q=0; q<12; q++){
            if (skipmek[q]) printf("1,");
            else  printf("0,");
         }
     printf("\r\n");
}


This has been reported, but not verified or acknowledged by CCS.

Last edited by asmboy on Fri Jul 27, 2012 10:20 am; edited 1 time in total
PCM programmer



Joined: 06 Sep 2003
Posts: 21708

View user's profile Send private message

PostPosted: Thu Jul 26, 2012 5:03 pm     Reply with quote
I made a test program and compiled it with vs. 4.135 and ran it in MPLAB
vs. 8.86 simulator and got this:
Quote:

InDeX 0 :0,1,1,1,1,1,1,1,1,1,1,1,
InDeX 1 :0,0,1,1,1,1,1,1,1,1,1,1,
InDeX 2 :0,0,0,1,1,1,1,1,1,1,1,1,
InDeX 3 :0,0,0,0,1,1,1,1,1,1,1,1,
InDeX 4 :0,0,0,0,0,1,1,1,1,1,1,1,
InDeX 5 :0,0,0,0,0,0,1,1,1,1,1,1,
InDeX 6 :0,0,0,0,0,0,0,1,1,1,1,1,
InDeX 7 :0,0,0,0,0,0,0,0,1,1,1,1,
InDeX 8 :0,0,0,0,0,0,0,0,0,1,1,1,
InDeX 9 :0,0,0,0,0,0,0,0,0,0,1,1,
InDeX 10 :0,0,0,0,0,0,0,0,0,0,0,1,
InDeX 11 :0,0,0,0,0,0,0,0,0,0,0,0,

Is that correct ? The zeros are cumulative because I don't re-initialize
the array elements each pass through the for() loop. But they are being
set to 0.

Here is the test program:
Code:

#include <18F452.h>
#fuses XT,NOWDT,PUT,BROWNOUT,NOLVP
#use delay(clock=4M)
#use rs232(baud=9600, xmit=PIN_C6, rcv=PIN_C7, ERRORS)

int1
skipmeK[96]={1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1
,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1};


void setskipK (int1 prx , unsigned int8 t) {
      unsigned int8 q;
            if (prx)  skipmek[t]=0;   // inverts prx
            else      skipmek[t]=1;
            printf("InDeX %u :",t);
         for (q=0; q<12; q++){
            if (skipmek[q]) printf("1,");
            else  printf("0,");
         }
     printf("\r\n");
}

//======================================
void main(void)
{
int8 t;

for(t=0; t<12; t++)
    setskipK(1, t);

while(1);
}
Ttelmah



Joined: 11 Mar 2010
Posts: 19538

View user's profile Send private message

PostPosted: Fri Jul 27, 2012 3:54 am     Reply with quote
As a comment, why not just use:

skipmek[t]=!prx;

There have definately been some oddities with int1 and arrays. However simple one dimensional arrays do seem to be OK.

I tried it as:
Code:

#include <18F452.h>
#fuses XT,NOWDT,PUT,BROWNOUT,NOLVP
#use delay(clock=4M)
#use rs232(baud=9600, xmit=PIN_C6, rcv=PIN_C7, ERRORS)

int1
skipmeK[96]={1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1
,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1};

void setskipK (int1 prx , unsigned int8 t) {
      unsigned int8 q;
      skipmek[t]=!prx;
      printf("InDeX %u : ",t,);
      for (q=0; q<12; q++) {
            printf("%1d ", skipmek[q]);
     }
     printf("\r\n");
}

//======================================
void main(void) {
    int8 t;

    for(t=0; t<12; t++)
        setskipK(1, t);

    while(1);
}

and it merrily works with every version I have tried. 4.099 and up...

Best Wishes
asmboy



Joined: 20 Nov 2007
Posts: 2128
Location: albany ny

View user's profile Send private message AIM Address

PostPosted: Fri Jul 27, 2012 10:27 am     Reply with quote
Stupid me .... this is a small part of a program that uses 85% of a 18f4525
AND I had reduced the code I posted w/o enough care.

This was actually the old core
Code:

      if (maxchannel){
          if (prx)  skipmek[t]=0;   // inverts prx
            else      skipmek[t]=1;
       }     

maxchannel is a global retrieved from flash storage
and I was forgetting to call the flash readback function
such that maxchannel was =0 when I tried it with 4.135


However I do very much appreciate that I was able, with outside help, to overcome the mental block and solve this.
Sincere thanks and an apology for wasting the time of others
when I should have been more thorough myself.
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group