18f2431 PLL

[rikotech8]

I'm using PIC18F2431 and the compiler version: 4.114
I am using 10MHz crystal resonator and my wish is to use PLL function to made 40MHz clock via multiplying oscillator frequency by 4. The problem is that I can't see neither oscillator settings for PLL, nor PLL fuse in my header file. How to set PLL on my clock?

[Ttelmah]

H4

Best Wishes

[rikotech8]

?

[Ttelmah]

The fuse to activate the PLL, is "H4". Stands for HS with *4 PLL. The fuse names on your compiler predate CCS 'standardising' on HS_PLL for this.

Best Wishes

[rikotech8]

oh I see now.
Thank you Ttelmah!