HELP!!a little more!!!

drzxoulis · Joined: 12 Apr 2004 Posts: 14

Is any possible way i could really make the expression below look simpler without loosing its functionality.?????

Haplo · Joined: 06 Sep 2003 Posts: 659 Location: Sydney, Australia

Are you sure you want to maintain the functionality of that code? Because I don't think it works properly as it is. You have overlapping conditions but they can't run together. For example if temp=100 and PRES=100, what do you want the code to print? Right now it will execute the line printf(lcd_putc,"\fPRESSURE:%4.0f mB\nHIGH TEMP",pres); but you also have another condition check to execute lcd_putc("\fLOW PRESSURE\nHIGH TEMP");, and this line will never run because the code flow will never get to this point.

drzxoulis · Joined: 12 Apr 2004 Posts: 14

As you said the whole loop doesn't really work.
what i want to achieve is just a way of presenting the limits on the lcd.
this means having for each limit something writen eg."low temp" and silmutaneously the result from the other.
But for some reason it doesn't work if i want to have both warnings on the lcd.

Any ideas?

Humberto · Posted: Sat Apr 17, 2004 8:06 am

drzxoulis,

I suggest the following:

1) Reserve the upper line of the LCD to display PRESURE values,
2) Reserve the lower line to display TEMP values.