CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
TCP/IP

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
Guest
TCP/IP
PostPosted: Mon Feb 16, 2004 8:00 pm     Reply with quote
Can any provide me (or direct me to a web site) a simple implementation of TCP/IP using PIC as the microcontroller.

What I need is a really simple schematic showing a PIC, and other components required and a small workable code (that compiles using CCS) just to show how the TCP/IP is implemented.
Izolator



Joined: 10 Feb 2004
Posts: 12
Location: Denmark, (Scandinavia-Europe)

View user's profile Send private message ICQ Number

PostPosted: Wed Feb 18, 2004 12:18 pm     Reply with quote
Hi there :-)

I have combined and used the following with great success:

Pic16F877 - Microchip.com
Packet Whacker - edtp.com
EDTP's example:
http://www.edtp.com/download/pw/whacky.exe


Note:
It might take �hour to figure out what it does/can do, but basicly it is set up for this, amung af few other features:
telnet server / TCP
Echo packet / UDP
Blink led / UDP
Ping / ICMP

I myself didnt have use for the TCP part, only UDP, so I simply removed the telnetserver part, along with all the complex TCP functions.

I think UDP is way easier to figure out.

You will have to decide whether or not to use TCP, UDP or both as per default.
rwyoung



Joined: 12 Nov 2003
Posts: 563
Location: Lawrence, KS USA

View user's profile Send private message Send e-mail

PostPosted: Wed Feb 18, 2004 12:24 pm     Reply with quote
Try and find a copy of Bentham's book TCP/IP Lean


Or Jan Axelson's book Embedded Ethernet and Internet Complete: Designing and Programming Small Devices for Networking

I think both are available through Amazon.com and if you are lucky maybe a local bookstore
_________________
Rob Young
The Screw-Up Fairy may just visit you but he has crashed on my couch for the last month!
rnielsen



Joined: 23 Sep 2003
Posts: 852
Location: Utah

View user's profile Send private message

PostPosted: Thu Feb 19, 2004 8:24 pm     Reply with quote
Or you could do what I did, and cheat. I used a network module, from www.lantronix.com, called XPORT. It will interface with the PIC via RS232 and take care of communications to the network.

Ronald
Kieran



Joined: 28 Nov 2003
Posts: 39
Location: Essex UK

View user's profile Send private message

Packet Whacker
PostPosted: Thu Nov 04, 2004 1:17 pm     Reply with quote
EDTP Packet Whacker

I have one of these hooked up to a 18F452 and have all the demo programs running.

I want to extend the UDP features and I am stuck.
I am trying to send a string back to a PC with the following
triggered by an incomming UDP message from the PC.
Src and Dest are derived from the incoming message.

Code:

byte dat_buff[128];

// Src source PORT
// Dest PORT
// *dat string to send
send_UDP(int16 Src, int16 Dest, byte *dat)
{
int16 package_len;
   memset(&packet[UDP_data],0,50); // Flush UDP data section of packet
   txlen = strlen(dat) + 8; // UDP data + header len

   ip_packet_len = 20 + txlen; // Allow for IP header
// Set IP header up
   packet[ip_pktlen] = make8(ip_packet_len,1);
   packet[ip_pktlen+1] = make8(ip_packet_len,0);

   setipaddrs();
// UDP header 
   packet[UDP_srcport] = make8(Src,1);
   packet[UDP_srcport + 1] = Src;
   packet[UDP_destport] = make8(Dest,1);
   packet[UDP_destport + 1] = Dest;

   txlen = strlen(dat) + 8; // UDP data + header len

   printf("send %s len %ld\r",dat,txlen);
   packet[UDP_len] = make8(txlen,1);  // Should be 0 - buffer size
   packet[UDP_len + 1] = txlen;

// Write data to packet
   strcpy(&packet[UDP_data],dat);

//calculate the UDP checksum
   packet[UDP_cksum] = 0x00;
   packet[UDP_cksum+1] = 0x00;

   hdr_chksum =0;
   hdrlen = 0x08;
   addr = &packet[ip_srcaddr];
   cksum();
   hdr_chksum = hdr_chksum + packet[ip_proto];
   hdrlen = 0x02;
   addr = &packet[UDP_len];
   cksum();
   hdrlen = make16(packet[UDP_len],packet[UDP_len+1]);
   addr = &packet[UDP_srcport];
   cksum();
   chksum16= ~(hdr_chksum + ((hdr_chksum & 0xFFFF0000) >> 16));
   packet[UDP_cksum] = make8(chksum16,1);
   packet[UDP_cksum+1] = make8(chksum16,0);

// Calculate length and send
   txlen = ip_packet_len + 14; // total packet len
   if(txlen < 60)
      txlen = 60;

   package_len = txlen + 4;

   pageheader[enetpacketLenH] = make8(package_len,1);   // ????????
   pageheader[enetpacketLenL] = package_len;

   dump_header(); 
   show_packet();

   data_L = make8(txlen,0);
   data_H = make8(txlen,1);
// Data to RTL8019
   write_creg(CR,0x22);
   write_creg(TPSR,txstart);
   write_creg(RSAR0,0x00);
   write_creg(RSAR1,0x40);
   write_creg(ISR,0xFF);
   write_creg(RBCR0,data_L);
   write_creg(RBCR1,data_H);
   write_creg(CR,0x12);

   for(i=0;i<(txlen);++i)
      write_creg(RDMAPORT,packet[enetpacketDest0+i]);

   byte_read = 0;
   while(!bit_test(byte_read,RDC))
      read_creg(ISR);

   write_creg(TBCR0,txlen - 4);
   write_creg(TBCR1,make8(txlen,1));
   write_creg(RBCR0,data_L);
   write_creg(RBCR1,data_H);
   write_creg(CR,0x24);
 
}



Calls and variables are from the packet whacker code.
If I replace the code from below the checksum with the Packet Whacker echo_packet() function then all is well. Any ideas?
Kieran
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group