lst file query

vaishali · Joined: 26 Mar 2004 Posts: 3

hi all
i am using the PCWH compiler
IDE version 3.41

i have a query, regarding where do i get to see the lst file of the #use directive

for eg.
if we write something like i = 29; in the .c file , in its .lst file we can see in which address or location 29 is stored,

like that
if i write #use i2c(Master,Fast,sda=PIN_C4,scl=PIN_C3)
where do i see the lst file for that... in the normal list file it is not there

thanking u in advance

Haplo · Joined: 06 Sep 2003 Posts: 659 Location: Sydney, Australia

It will not be there if you don't use any I2C functions in your code. As soon as you use a I2C fucntion, CCS will generate code for the #USE I2C and you will be able to see it in your .LST file.

This is from the .LST of one of my projects:

vaishali · Joined: 26 Mar 2004 Posts: 3

thank you very much, i will try that...... i have another question
in
#use i2c(Master,Fast,sda=PIN_C4,scl=PIN_C3) where have the words, Master, fast etc. been defined????
in the #include <18F258.h> ( i am using PIC 18f258 ) most of the words are defined, but i did not get any refrence for the I2c and even for RS232, could u tell me in which file will i find it?

thanking u in advance

Haplo · Joined: 06 Sep 2003 Posts: 659 Location: Sydney, Australia

Look at the help file, and also the Readme.txt file in the \PICC directory.

dyeatman · Joined: 06 Sep 2003 Posts: 1938 Location: Norman, OK

How about reading the Reference MANUAL?