CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
SD/MMC card problem (Tomi driver)

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
Jody



Joined: 08 Sep 2006
Posts: 182

View user's profile Send private message Send e-mail

SD/MMC card problem (Tomi driver)
PostPosted: Fri May 20, 2011 3:01 am     Reply with quote
Hello,

compiler: 4.119
pic: 18F8722
clock:40MHz

I have connected the SD card, at 3.3V and with resistor divider so far so good. When I do a MMC init.. it return oke...InitFat is oke...
I can ask the Label frrom the SD card....

Reading the SD card is oke.. I can display the files and the label of the SD card.
But... when I want to open a file to write it, it fails.. It keeps on communicating with the SD card but never return... I have found that there is something wrong with the FindDIrEntry but What ever I try I can't get it fixed.....

If anyone wants I will post the driver code...
But here is mine test code...

Regards,
Jody

Code:
#include "C:\MentorProjects\Teugel_Trek_Meter\PIC_CODE\MMC_PIC18F8722\MMC.h"
#include <stdlib.h>
#include <math.h>
#include <string.h>
#include <MyMMCFAT32.h>
#include <MyMMCFAT32.c>


short one_tenth_fl;
short one_sec_fl;
char f,filename[20],res,i,c;
char gfilename[12];
char msg[50], shour[4], sminutes[4], sseconds[4],stenth[4], sTeugelkracht_links[4], sTeugelkracht_rechts[4];
char sPotmeter_links[4], sPotmeter_rechts[4], sres[4];
char dubbelpunt[3], minnetje[3], afsluiting[7], meting_naam[12], punt_txt[4];

#define LED1         pin_E3
#define LED2         pin_E2



void main()
{
  setup_adc_ports(AN0_TO_AN3|VSS_VDD);
  setup_adc(ADC_CLOCK_DIV_32|ADC_TAD_MUL_20);

//  setup_spi(SPI_MASTER|SPI_L_TO_H|SPI_CLK_DIV_4);
//setup_spi(SPI_SS_DISABLED);
  setup_spi2(SPI_SS_DISABLED);

  setup_wdt(WDT_OFF);
  setup_timer_0(RTCC_INTERNAL);
  setup_timer_1(T1_EXTERNAL|T1_DIV_BY_1|T1_CLK_OUT);
  setup_timer_2(T2_DISABLED,0,1);
  setup_comparator(NC_NC_NC_NC);
  setup_vref(FALSE);


  output_low(LED1);
  output_low(LED2);

  printf("\r\nversie 1.0\r\n");

  while(1)
  {
  if(MMCInit() == MMC_OK)                                 
         {                                                       
            printf("MMC initialized\r\n");                       
            InitFAT();                                           
            strcpy(filename,"");                             
            f = InitList(filename);                             
            if(f & MMC_ERROR)                                   
               printf("Error");                                 
            else                                                 
            {                                                   
               do                                               
               {                                                 
                  res = ListFiles(f);                           
                  for(i=0;i<res;i++)                           
    {               
printf("i   =  %d\n",i);               
printf("res =  %d\n",res);                             
                     printf(FileList[i].name);                   
                     if(FileList[i].isDir)
                  {
printf("filelist");                       
                        printf("\\\r\n");//a "\" with row break 
                  }
                     else
                  {                                       
                        printf("\r\n");                         
                  }
                  }                                             
               } while(NextPage(f) == MMC_OK);                   
               CloseList(f); // frees the file, but the list is 
            }                // still there...                   
            strcpy(filename,FileList[0].shortName); 
printf("filename = %s",filename);           
            f = fopen(filename,'r'); // open file for reading   
printf("file open"); 
            if((f & MMC_ERROR) == 0) // No error, same as       
            {                        // if(f < MAXFILES)         
               while(fgetch(&c,f) == MMC_OK)                     
                  printf(c);                                     
               fclose(f);                                       
            }                                                   
            else if(f == MMC_NOT_FOUND)                         
               printf("1st file in list was probebly a dir");   
            else                                                 
               printf("Other error\r\n");                       
            while(TRUE)
         {       

//fputstring(msg,f);                                 
             printf("Loop forever, program is finished\n\r");
         delay_ms(1000);
         }   
         }                                                       
         else                                                   
            printf("MMC init failed!\r\n");                     
         delay_ms(1000);                                         
         printf("Trying once more..\r\n");   



  }
}

MikeW



Joined: 15 Sep 2003
Posts: 184
Location: Warrington UK

View user's profile Send private message

PostPosted: Fri May 20, 2011 7:24 am     Reply with quote
post the driver just in case
PCM programmer



Joined: 06 Sep 2003
Posts: 21708

View user's profile Send private message

PostPosted: Fri May 20, 2011 5:41 pm     Reply with quote
If it's the same Tomi code as in the CCS code library, then he should just
post a link to it. Don't post the whole code.
ckielstra



Joined: 18 Mar 2004
Posts: 3680
Location: The Netherlands

View user's profile Send private message

PostPosted: Sat May 21, 2011 9:10 am     Reply with quote
Code:
  setup_spi2(SPI_SS_DISABLED);
SPI defaults to Master mode. Disabling the Slave Select pin on a Master results in an invalid configuration for SPI2. To disable SPI2 use:
Code:
  setup_spi2(FALSE);


What size is your card and how is it formatted? FAT32 or FAT16? FAT16 is much faster than FAT32 on the PIC processors but limited up to 2GB cards.

See also this comment from another thread:
Pret wrote:
In Tomi's code and also in most of FAT implementations on small controllers, there is a constraint regarding sectors per cluster. Only one sector is allowed per cluster.

You can format a disk with this contraint in command line. You do not need third party software. Just type in cmd "format i: /A:512". I could not format disks smaller than 64M as FAT32.
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group