CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
The PC can't detect PIC18f4550

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
batacarco



Joined: 23 Apr 2014
Posts: 5

View user's profile Send private message

The PC can't detect PIC18f4550
PostPosted: Wed Apr 23, 2014 9:29 pm     Reply with quote
I installed the INF file. Windows 7 64 bits, I load the bootloader ex usb drivers coming in CCS Compiler, USB cable to connect the microcontroller to the computer does not recognize dipositive Crying or Very sad
Ttelmah



Joined: 11 Mar 2010
Posts: 19540

View user's profile Send private message

PostPosted: Thu Apr 24, 2014 2:06 am     Reply with quote
You need to start at the beginning:

1) Have you verified the PIC _is_ running, and running at the correct speed?.
2) Have you got the connections to the USB bus the right way round? (surprisingly common to get these reversed).
3) Have you got the connections so that the PIC can detect Vbus (pin B2)?.
4) Is Vusb giving the right voltage?.
5) Is pin A4 low?.
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group