18f4620+Enc28J60 CCS tcp/ip development kit.

[rikotech8]

Hello everyone!
I am trying to create web server based on above mentioned dev. board. With example "ex14.c" was no problems. I connected the uC remotely, and everything works just fine, until I tried with the more advanced "ex15" that includes some EEPROM libraries. Then I got stuck.
The problem is that during the compilation errors has occurred.
Here is the error list:

https://drive.google.com/file/d/0B_EYtdS7J5eKVm5DS1dLRDdyN1k/edit?usp=sharing

I manually substituted the macros so I can see that SPIFlashReadArray is another macros to the read_ext_eeprom_buff (which is missing) somewhere among the libraries.It is shown by the red arrow.

So if somebody has something to do with ex15.c from CCS tcp/ip stack tools, I would appreciate some help.

Here is some useful links:

https://drive.google.com/file/d/0B_EYtdS7J5eKNE1FaVU1dVVDOW8/edit?usp=sharing
https://drive.google.com/file/d/0B_EYtdS7J5eKVnR6NWlkaHdWSEE/edit?usp=sharing
https://drive.google.com/file/d/0B_EYtdS7J5eKajI4a2ItWVhXbk0/edit?usp=sharing

Thank you in advance!
_________________
A person who never made a mistake never tried anything new.