CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
BMP280 Pressure Sensor

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
MotoDan



Joined: 30 Dec 2011
Posts: 55

View user's profile Send private message

BMP280 Pressure Sensor
PostPosted: Wed Mar 28, 2018 4:15 pm     Reply with quote
Has anyone done any work with the Bosch BMP280 pressure sensor? I found the work that user ajt did a few years back on the BMP085, however the two sensors are not as similar codewise as I had hoped.

http://www.ccsinfo.com/forum/viewtopic.php?t=48874
temtronic



Joined: 01 Jul 2010
Posts: 9245
Location: Greensville,Ontario

View user's profile Send private message

PostPosted: Thu Mar 29, 2018 5:22 am     Reply with quote
not me but... try googling ' bmp280 ccs c code' or similar to see if you get hits ? LOTS of people use CCS C and do not visit and/or post their code on this forum.
Gabriel



Joined: 03 Aug 2009
Posts: 1067
Location: Panama

View user's profile Send private message

PostPosted: Thu Mar 29, 2018 2:28 pm     Reply with quote
I have... and its a pain to get it working...
I'll upload my code when i get a chance for you and others.
_________________
CCS PCM 5.078 & CCS PCH 5.093
MotoDan



Joined: 30 Dec 2011
Posts: 55

View user's profile Send private message

PostPosted: Sat Mar 31, 2018 9:02 am     Reply with quote
Thanks Gabriel
Gabriel



Joined: 03 Aug 2009
Posts: 1067
Location: Panama

View user's profile Send private message

PostPosted: Mon Apr 02, 2018 6:29 am     Reply with quote
http://www.ccsinfo.com/forum/viewtopic.php?t=57090

Here you go.

G.
_________________
CCS PCM 5.078 & CCS PCH 5.093
Gabriel



Joined: 03 Aug 2009
Posts: 1067
Location: Panama

View user's profile Send private message

PostPosted: Wed Apr 11, 2018 12:14 pm     Reply with quote
So.... did this help you? or was this just a "pump and dump" / "gimme code" type of thread?

I was hoping to maybe get some feedback too on the driver.

G.
_________________
CCS PCM 5.078 & CCS PCH 5.093
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group