CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
PIC24F PLL OSCILLATOR

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
paul.s



Joined: 04 Nov 2009
Posts: 2

View user's profile Send private message

PIC24F PLL OSCILLATOR
PostPosted: Wed Nov 04, 2009 7:54 pm     Reply with quote
I have troubles to make my PIC to work at 40MHz using a 10MHz XTAL.
Unfortunately in the PCD documentation there is no code example about this.

Has someone got the PIC24F working with PLL X 4?
bkamen



Joined: 07 Jan 2004
Posts: 1615
Location: Central Illinois, USA

View user's profile Send private message

PostPosted: Wed Nov 04, 2009 11:49 pm     Reply with quote
The PIC24F Fosc is limited to 32MHz with a max CPU Fcy of 16MHZ.

To run the part at 40MHz (/2) will be over it's max clock rate...


Otherwise, setting what you need is as easy as:

Code:
#use delay(clock=32M, crystal=8M)


-Ben
_________________
Dazed and confused? I don't think so. Just "plain lost" will do. :D
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group