CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
interrupts problem

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
koirnaos



Joined: 23 Dec 2009
Posts: 6

View user's profile Send private message

interrupts problem
PostPosted: Tue Jan 25, 2011 9:20 am     Reply with quote
I want to use timer0 in my code and i got this warning:

Code:
Interrupts disabled during call to prevent re-entrancy


Here is my code:

Code:

#include <16F877A.h>
#include <stdio.h>
#include <string.h>
#fuses XT,NOWDT,PUT,NOBROWNOUT,NOLVP
#use delay(clock=4000000)
#define INTS_PER_SECOND 15
#byte PORTB = 0x06
#byte PORTA = 0x05

#include <lcd_flex.c>
#include <flex_kbrd_test.h>

int count = INTS_PER_SECOND;

#use rs232(baud=9600, xmit=PIN_C6, rcv=PIN_C7)

#int_timer0
void timer0isr(){
   count--;
   if(count==0) {
      count = INTS_PER_SECOND;
      if(initial==ans[1]){
         gsm();
      }
      if(s==ans[0]){
      printf("AT+CMGD=%c", car);
      putc(0x0D);
         for(i=0;i<16;i++){
            res1[i]=getc();
         }
      output_low(PIN_A4);
      output_low(PIN_A4);
      //delay_ms(1200);
      }
   }
}


void main() {
   char input = 0;
 
   lcd_init();
   lcd_putc( LOGIN_TEXT );
   initial=ans[0];
   
   enable_interrupts(INT_TIMER0);
   enable_interrupts(GLOBAL);
   setup_timer_0(RTCC_INTERNAL|RTCC_DIV_256);
   
   while(TRUE) {

      input = kbd_getc();
      if( input != 0 )
         handleInput( input );
   }
}


Is there another way to use the gsm function in my interrupt without having this warning?

I tried making gsm() function an inline one but it didn't work, same warning.

Then I made another function gsm_isr(), copied the gsm() function inside the new one and call it in the timer0_isr, same problem.
What am I doing wrong?
Ttelmah



Joined: 11 Mar 2010
Posts: 19537

View user's profile Send private message

PostPosted: Tue Jan 25, 2011 10:47 am     Reply with quote
At the end of the day, set a flag, get out of the interrupt, and do just about _everything_ you have in the interrupt, outside.

Your print for example, will take just on 9mSec to execute.
Then you put another character. 1mSec.
Then you wait for 16 characters. _Even if these are arriving without pause_, another 16mSec.
The odds are that the GSM module will take significant time to reply, making this even worse.

If you want to fire a trigger string to the module from the timer, then use interrupt buffered serial transmit and receive code. In the interrupt, just put the 'send' bytes into the output code, then have the receive code set a flag when 16 characters are in the RX buffer. In your main, process the string, when this is seen
However always 'beware' of just character counting. Remember things can be missed. As currently shown, if there are not 16 characters after the transmission, the code would hang for ever....

As for the error, I'd guess (since you don't show it), that the 'gsm' routine, calls something else, that is also used in your main, or in HandleInput. This is the reason for the error message, but the fundamental 'problem' is trying to do far to much in the interrupt handler...

Best Wishes
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group