Send and receive data thru Eth w/ PIC16F

Jasen · Joined: 31 Aug 2009 Posts: 6

Hi, I bought a board with Ethernet RJ45 and ENC28J60 built in. Do you have any example software (with pic 16F) to send and receive data thru this board (SPI). Let’s suppose an Ethernet net ...lets example a PC sending data thru eth to a PIC. Depending of data sending, its turn on a LED...

temtronic · Posted: Thu Dec 26, 2013 8:14 pm

comment: Have you looked in the examples folder that CCS supplies? A fairly recent version of the compiler probably has a sample code there.

If not, try the 'code library' here,some one might have posted their efforts there.

hth
jay

asmallri · Joined: 12 Aug 2004 Posts: 1635 Location: Perth, Australia

jgschmidt · Joined: 03 Dec 2008 Posts: 184 Location: Gresham, OR USA

If you have an Ethernet network communication requirement then look at the Wiznet 5100 boards out there. They handle the TCP/IP heavy lifting and you can talk to them via serial port. This allows you to connect anything with a serial port to a TCP/IP network and the Internet. The WIZ105SR and WIZ110SR boards are my favorites for this. They're available from most electronics suppliers.
_________________
Jürgen
www.jgscraft.com