Question about button() function

sahu77 · Joined: 08 Sep 2011 Posts: 202

Anybody can explain

temtronic · Posted: Tue Feb 18, 2014 12:19 pm

Easy ! goto -> http://www.ccsinfo.com/forum/viewtopic.php?t=23837

PCMProgrammer's 'button' function. EVERYTHING you need to know about it is carefully commented. It's his version of the PBP 'button' function.

hth
jay

sahu77 · Joined: 08 Sep 2011 Posts: 202

thank you dear temtronic,
i have need 1 simple code for push on switch.
1) push switch till 500 ms
2) count =1
3) ofter 2 sec again push switch till 500 ms
4) count =2
.
.
.
..
count =8
if( count >=8)
count ==0
pl help me
_________________
sahu

ezflyr · Joined: 25 Oct 2010 Posts: 1019 Location: Tewksbury, MA

Sahu,

Please don't hijack ZombiePIC's thread!! Start your own thread with your switch question! Don't confuse things more than they already are by posting it here!!

John

++++++++++++++++++++
Split into new thread per request.

- Forum Moderator
++++++++++++++++++++

ezflyr · Joined: 25 Oct 2010 Posts: 1019 Location: Tewksbury, MA

Hi Sahu,

What is the significance of the 500mS 'On' time, and the 2 second 'Off' time? No intelligently designed User Interface is going to have those constraints 'just because'...... If you use PCM Programmers 'button' function, it will take care of the switch debounce for you, so all you need to do is add the counting code with terminal reset at a count of 8. Should be very easy!

What am I missing?

John