CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support

GSE Generic stream Encapsulation

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
ALCION



Joined: 31 May 2007
Posts: 16

View user's profile Send private message

GSE Generic stream Encapsulation
PostPosted: Sat Nov 08, 2014 2:55 pm     Reply with quote

know if there is any example or application of this protocol?
I just start studying in question but I need to connect a PIC16F886 to have communication.
Thank you!
temtronic



Joined: 01 Jul 2010
Posts: 9244
Location: Greensville,Ontario

View user's profile Send private message

PostPosted: Sat Nov 08, 2014 3:14 pm     Reply with quote

I just had a quick look at GSE at wikipedia for an overview and seriously doubt that an 886 could be used for it. Seems you'd need a LOT of memory resources to create the datastream let alone interface 'to the outside world'.
Not to say it couldn't be done but.....

How much time do you have to complete the project?

Jay
ALCION



Joined: 31 May 2007
Posts: 16

View user's profile Send private message

GSE Generic stream Encapsulation
PostPosted: Sat Nov 08, 2014 4:16 pm     Reply with quote

Thanks for the quick response Temtronic.
Originally J1939 would use to read codes from a forklift, but I saw that the truck had 2 connectors one with GSE, place the oscilloscope and saw it was 9600 bps RS232 started reading frames that sent the truck to ask some parameter.
But now I need to do with a pic, and I'm looking for how to interpret these values of GSE protocol.
PCM programmer



Joined: 06 Sep 2003
Posts: 21708

View user's profile Send private message

PostPosted: Sat Nov 08, 2014 5:24 pm     Reply with quote

Why would a forklift have anything to do with Digitial Video Broadcasting ?
http://en.wikipedia.org/wiki/Generic_Stream_Encapsulation
ALCION



Joined: 31 May 2007
Posts: 16

View user's profile Send private message

GSE Generic stream Encapsulation
PostPosted: Sat Nov 08, 2014 5:39 pm     Reply with quote

I do not know. Caterpillar forklift is the brand and has 2 connectors J1939 and another one for a GSE label this jack I put an OSC Tecktronicx MSO4104 to see data packets, RS232 and 9600 8n1.
I have data packets in hex values, but I do not know how to interpret these values so look for the GSE protocol.
I do not know if I can upload images to add.

Any suggestions, thanks!
PCM programmer



Joined: 06 Sep 2003
Posts: 21708

View user's profile Send private message

PostPosted: Sat Nov 08, 2014 5:42 pm     Reply with quote

Regarding the image posting question, go here:
http://postimage.org/
Upload your image. Select family safe. Then click the first button for
Hotlink to Forum to get a link to the image.
Then go to the CCS forum and type Ctrl-V to paste the link into a post.

If that website doesn't work in your country, then use Google to find
another free image hosting site for forums.
ALCION



Joined: 31 May 2007
Posts: 16

View user's profile Send private message

PostPosted: Sat Nov 08, 2014 6:00 pm     Reply with quote

forklift
http://s25.postimg.org/um2y13h5b/IMG_5596.jpg
connector
http://s25.postimg.org/qboa5ic27/IMG_5602.jpg
signal
http://s14.postimg.org/tb6etyxch/IMG_6440.jpg
data packets
http://s25.postimg.org/4nzbv2bnz/IMG_6446.jpg


tnks!
PCM programmer



Joined: 06 Sep 2003
Posts: 21708

View user's profile Send private message

PostPosted: Sat Nov 08, 2014 6:06 pm     Reply with quote

Caterpiller forklift GSE cable:
http://www.ebay.com/itm/Cat-forklift-g-s-e-cable-/131344229824?pt=BI_Heavy_Equipment_Parts&hash=item1e94b9e5c0
According to that page, it says:
Quote:
This is a gse cable for cat lift trucks, this is the laptop to ecm/vcm communication [cable].

It's some kind of diagnosis/service connector:
http://specdiag.com/cat-lift-trucks-diagnozer.html
ALCION



Joined: 31 May 2007
Posts: 16

View user's profile Send private message

PostPosted: Sat Nov 08, 2014 6:13 pm     Reply with quote

so is PCM programmer, I have that cable and interface parameters to query the forklift from a laptop.
What I want is to read these parameters through a pic18X and send via serial.
My original question is about the GSE protocol, with osc shown as RS232, but I have no reference data in data packets.
  Thank you!
PCM programmer



Joined: 06 Sep 2003
Posts: 21708

View user's profile Send private message

PostPosted: Sat Nov 08, 2014 6:14 pm     Reply with quote

Search the net or contact Caterpillar corporation and ask for the GSE
protocol document (if they have one, or if they will give it out).

This page says GSE is the abbreviation for Ground Support Equipment:
http://www.catlifttruck.com.sg/modules/press/press-details.aspx?id=17
ALCION



Joined: 31 May 2007
Posts: 16

View user's profile Send private message

PostPosted: Sat Nov 08, 2014 6:23 pm     Reply with quote

thanks will do that and comment results ...
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group