 |
 |
| View previous topic :: View next topic |
| Author |
Message |
art
Joined: 21 May 2015
Posts: 181
|
| Write Integer to EEPROM |
 Posted: Wed Jul 26, 2017 2:19 am |
 |
|
Hi,
I need to write an integer 1234 to eeprom.
Suppose it should display 1234, but it will show 210.
I need help to solve this problem.
Here is my code.
| Code: |
#include <18F4550.h>
#fuses HSPLL,NOWDT,PROTECT,NOLVP,NODEBUG,USBDIV,PLL5,CPUDIV1,VREGEN
#use delay(clock=48000000)
#use rs232(baud=9600, xmit=PIN_C6, rcv=PIN_C7,ERRORS)
#include <string.h>
#include <input.c>
#include <stdio.h>
#include <stdlib.h>
#include <usb_cdc.h>
#include <math.h>
#include "24256.c"
void main()
{
char c;
unsigned char d;
unsigned char key;
int32 data=1234;
usb_init_cs();
while (TRUE)
{
usb_task();
if (usb_cdc_kbhit())
{
c=usb_cdc_getc();
if (c=='\n') {putc('\r'); putc('\n');}
if (c=='\r') {putc('\r'); putc('\n');}
while(true)
{
d = usb_cdc_getc();
if(d=='C') // push C
{
while (key!=32) // push SPACE BAR to stop
{
if(usb_cdc_kbhit())
{key=usb_cdc_getc();}
init_ext_eeprom();
{
write_ext_eeprom(0, data);
read_ext_eeprom(0);
printf(usb_cdc_putc,"\r\nmSEC: %lu\r\n",(int16)read_ext_eeprom(0) );
}
} key=0; // to initialize 'key' not as SPACE BAR
}
}
}
}
}
|
|
|
 |
Ttelmah
Joined: 11 Mar 2010
Posts: 19539
|
|
| Posted: Wed Jul 26, 2017 2:43 am |
|
|
write_eeprom, and read_eeprom, read _one byte_, to/from the EEPROM. That is what it says in the manual....
The functions to read/write larger types, are in the library 'internal_eeprom.c'.
write_int32_eeprom, and read_int32_eeprom |
|
|
PCM programmer
Joined: 06 Sep 2003
Posts: 21708
|
|
| Posted: Wed Jul 26, 2017 2:44 am |
|
|
Look in the CCS drivers directory for the external_eeprom.c file.
It has functions to read and write int32 variables to eeprom. |
|
|
Ttelmah
Joined: 11 Mar 2010
Posts: 19539
|
|
| Posted: Wed Jul 26, 2017 2:48 am |
|
|
| Apologies. Heading said 'EEPROM', not 'external EEPROM', so I assumed the internal EEPROM..... |
|
|
art
Joined: 21 May 2015
Posts: 181
|
|
| Posted: Wed Jul 26, 2017 3:29 am |
|
|
If I change to int32, it will compile with error --> Undefined identifier -- write_int32_ext_eeprom.
What should I do?
| Code: |
#include <18F4550.h>
#fuses HSPLL,NOWDT,PROTECT,NOLVP,NODEBUG,USBDIV,PLL5,CPUDIV1,VREGEN
#use delay(clock=48000000)
#use rs232(baud=9600, xmit=PIN_C6, rcv=PIN_C7,ERRORS)
#include <string.h>
#include <input.c>
#include <stdio.h>
#include <stdlib.h>
#include <usb_cdc.h>
#include <math.h>
#include "24256.c"
void main()
{
char c;
unsigned char d;
unsigned char key;
int32 data=1234;
usb_init_cs();
while (TRUE)
{
usb_task();
if (usb_cdc_kbhit())
{
c=usb_cdc_getc();
if (c=='\n') {putc('\r'); putc('\n');}
if (c=='\r') {putc('\r'); putc('\n');}
while(true)
{
d = usb_cdc_getc();
if(d=='C') // push C
{
while (key!=32) // push SPACE BAR to stop
{
if(usb_cdc_kbhit())
{key=usb_cdc_getc();}
init_ext_eeprom();
{
write_int32_ext_eeprom(0, data);
read_int32_ext_eeprom(0);
printf(usb_cdc_putc,"\r\nmSEC: %lu\r\n",read_int32_ext_eeprom(0) );
}
} key=0; // to initialize 'key' not as SPACE BAR
}
}
}
}
} |
|
|
|
PCM programmer
Joined: 06 Sep 2003
Posts: 21708
|
|
| Posted: Wed Jul 26, 2017 3:52 am |
|
|
Art, when you add a driver file, you #include it, just like you've done with
all the other drivers near the start of your program. |
|
|
art
Joined: 21 May 2015
Posts: 181
|
|
| Posted: Wed Jul 26, 2017 3:58 pm |
|
|
Hi PCM,
I've just modified the code. I found out if i put #include <external_eeprom.c> , it will compile with many errors , however if write the code as below it can successfully compile. However i have not test it. Is it correct ?
| Code: |
#include <18F4550.h>
#fuses HSPLL,NOWDT,PROTECT,NOLVP,NODEBUG,USBDIV,PLL5,CPUDIV1,VREGEN
#use delay(clock=48000000)
#use rs232(baud=9600, xmit=PIN_C6, rcv=PIN_C7,ERRORS)
#include <string.h>
#include <input.c>
#include <stdio.h>
#include <stdlib.h>
#include <usb_cdc.h>
#include <math.h>
#include "24256.c"
int8 i;
int16 data;
void write_int16_ext_eeprom(EEPROM_ADDRESS address, int16 data)
{
for(i = 0; i < 2; ++i)
{
write_ext_eeprom(address + i, *((int8 *)(&data) + i));
}
}
int16 read_int16_ext_eeprom(EEPROM_ADDRESS address)
{
for(i = 0; i < 2; ++i)
{
*((int8 *)(&data) + i) = read_ext_eeprom(address + i);
}
return(data);
}
void main()
{
char c;
unsigned char d;
unsigned char key;
int16 data=1234;
usb_init_cs();
while (TRUE)
{
usb_task();
if (usb_cdc_kbhit())
{
c=usb_cdc_getc();
if (c=='\n') {putc('\r'); putc('\n');}
if (c=='\r') {putc('\r'); putc('\n');}
while(true)
{
d = usb_cdc_getc();
if(d=='C') // push C
{
while (key!=32) // push SPACE BAR to stop
{
if(usb_cdc_kbhit())
{key=usb_cdc_getc();}
init_ext_eeprom();
{
write_int16_ext_eeprom(0, data);
read_int16_ext_eeprom(0);
printf(usb_cdc_putc,"\r\nmSEC: %lu\r\n",read_int16_ext_eeprom(0) );
}
} key=0; // to initialize 'key' not as SPACE BAR
}
}
}
}
}
|
|
|
|
PCM programmer
Joined: 06 Sep 2003
Posts: 21708
|
|
| Posted: Wed Jul 26, 2017 5:01 pm |
|
|
You have to put it below the 24256.c eeprom driver, as shown in bold
below. You will get some USB driver warnings, but those don't matter.
| Quote: |
#include <18F4550.h>
#fuses HSPLL,NOWDT,PROTECT,NOLVP,NODEBUG,USBDIV,PLL5,CPUDIV1,VREGEN
#use delay(clock=48000000)
#use rs232(baud=9600, xmit=PIN_C6, rcv=PIN_C7,ERRORS)
#include <string.h>
#include <input.c>
#include <stdio.h>
#include <stdlib.h>
#include <usb_cdc.h>
#include <math.h>
#include "24256.c"
#include <external_eeprom.c>
|
If you still get errors, then post the errors and your CCS compiler version. |
|
|
art
Joined: 21 May 2015
Posts: 181
|
|
| Posted: Wed Jul 26, 2017 6:51 pm |
|
|
Hai PCM
If i put #include<external_eeprom.c> before #include "24256.c". It will show errors when compile . If i put after it, it can compile without error. I have test the code and it works. It shows output 1234.
Thanks PCM |
|
|
Ttelmah
Joined: 11 Mar 2010
Posts: 19539
|
|
| Posted: Wed Jul 26, 2017 11:13 pm |
|
|
It's worth saying 'why'.
The 'driver' here is a set of code. It provides functions to read/write multiple bytes to EEPROM, _using the standard functions to read/write one byte to the EEPROM_.
The compiler reads things sequentially.
So the function to read/write one byte, needs to be prototyped or defined before the multi byte 'driver' can use them.
This is why the includes need to be before you use them. 
First a comment.
You only need to init the EEPROM once at the start of the code.
Then a general question.
Why are you including math.h?.
Math.h is not needed for the normal arithmetic (+-*/ etc..). It is only needed for 'high level' maths (sin, code, exp etc.). Generally this maths is stuff that you should think very carefully before using in a microprocessor.
At the moment you are not using it, but 'beware' if you do. |
|
|
art
Joined: 21 May 2015
Posts: 181
|
|
| Posted: Thu Jul 27, 2017 1:40 am |
|
|
Dear ttelmah
Thanks for the explanation.
Actually, the original code is quite long and i forgot to delete the Math.h function. |
|
|
Ttelmah
Joined: 11 Mar 2010
Posts: 19539
|
|
| Posted: Thu Jul 27, 2017 4:14 am |
|
|
The comment about math.h still applies though...
You should think _very_ hard if there is a way not to use it. 99.9% of code can be done using a bit more ingenuity, and often saving a lot of size/time, without this. The few things that do 'need' high level maths are often better coded using perhaps a look up table, or slightly less accurate alternative functions.
In possibly several thousand projects, I've only used math.h on a PIC in perhaps less than 1% of them. |
|
|
oxo
Joined: 13 Nov 2012
Posts: 219
Location: France
|
|
| Posted: Thu Jul 27, 2017 4:31 am |
|
|
| Ttelmah wrote: | | several thousand projects |
Superman. |
|
|
Ttelmah
Joined: 11 Mar 2010
Posts: 19539
|
|
| Posted: Thu Jul 27, 2017 4:44 am |
|
|
No, just been at it a _long_ time.... (There isn't a standard emoticon for something like a 'father time' figure).
When MicroChip posted a 'potted history' of the PIC, I had to point out to them that one of their dates was wrong, since I had been using a PIC before they said it had been released....
Also some things can be tiny. Just a chip to generate a particular timing etc..
If you are involved in perhaps ten big projects, and then a few dozen little things like this a year, and do it non stop for perhaps 40 years, it 'adds up'....
Many of the big things use larger processors, but less and less now, with the capabilities of the 16bit PIC's. |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
FAQ 
Search
Register
Profile 
Log in to check your private messages 
Log in
