| View previous topic :: View next topic |
| Author |
Message |
E_Blue
Joined: 13 Apr 2011
Posts: 417
|
| PIC24F RX2 doesn't work(SOLVED) |
 Posted: Wed Feb 03, 2021 4:24 pm |
 |
|
CCS v5.091
MPLAB X IDE 5.15
ICD3
PIC24FJ1024GB606
I'm trying to receive data on pin RG9 at 19200bps but get nothing.
The PIC is connected to 3.3V and the GPS at UART2 send 2.8V data.
I get not even a single interrupt
I can send data correctly but not receive; so I think that the bps are set it correctly.
2.8V is not enough?
This is a reduced code.
| Code: |
#pin_select U2TX=PIN_D5
#pin_select U2RX=PIN_G9
#use rs232(UART2,stream=GPS,NOINIT)
void main()
{
output_b(0);
output_c(0);
output_d(0);
output_e(0);
output_f(0);
output_g(0);
set_tris_b(0b1001001001010110);
set_tris_c(0b0110000000000000);
set_tris_d(0b111100000011);//RTS=GSM OUT=D2 RTS=GSM_IN=D1 - RD4=SPI_DO - RD5=SPI_DI - RD6=SPI_CLK - RD7=SPI_CS
set_tris_e(0b11000011);
set_tris_f(0b10000000);
set_tris_g(0b11001000000);
SETUP_PMP(PAR_DISABLE,0);
SETUP_PSP(PAR_DISABLE,0);
SETUP_CLC1(CLC_DISABLED);
SETUP_CLC2(CLC_DISABLED);
SETUP_CLC3(CLC_DISABLED);
SETUP_CLC4(CLC_DISABLED);
SETUP_CAPTURE(1,CAPTURE_OFF);
SETUP_CAPTURE(2,CAPTURE_OFF);
SETUP_CAPTURE(3,CAPTURE_OFF);
SETUP_CAPTURE(4,CAPTURE_OFF);
SETUP_CAPTURE(5,CAPTURE_OFF);
setup_uart(GPS_BPS1,GPS);
} |
Should I configure something more?
_________________
Electric Blue
Last edited by E_Blue on Wed Feb 03, 2021 4:58 pm; edited 1 time in total |
|
 |
PCM programmer
Joined: 06 Sep 2003
Posts: 21708
|
|
|
E_Blue
Joined: 13 Apr 2011
Posts: 417
|
|
| Posted: Wed Feb 03, 2021 4:57 pm |
|
|
It seems like I'm running in circles. 
I'm the ones that need to kick the same stone twice. 
Thanks. 
_________________
Electric Blue |
|
|
temtronic
Joined: 01 Jul 2010
Posts: 9246
Location: Greensville,Ontario
|
|
| Posted: Wed Feb 03, 2021 6:19 pm |
|
|
re:
| Quote: | | It seems like I'm running in circles. |
Just to let you know....It gets worse the older you get !!!!! |
|
|
Ttelmah
Joined: 11 Mar 2010
Posts: 19552
|
|
| Posted: Thu Feb 04, 2021 1:31 am |
|
|
and the circles get smaller...  |
|
|
|
FAQ 
Search
Register
Profile 
Log in to check your private messages 
Log in
