Will Reeve
Joined: 30 Oct 2003 Posts: 209 Location: Norfolk, England
|
ICD1 upgrade |
Posted: Mon Apr 05, 2004 10:28 am |
|
|
Hi all,
I vaguely remember reading on here that you can upgrade a Microchip ICD 1 by replacing the PIC16LF876 with a PIC18LF252 and increasing the clock frequency (replacing the crystal). The 16LF876 is hard to find without going to Microchip direct.
Does anyone have the firmware I need to load into the 18LF252 to allow this to work, and what crystal do I need 40MHz?
I�ve tried searching but can�t find the original post I read about this. Can anyone help?
Keep well,
Will |
|