#ROM doesn't seem to work.

[theMagni]

I'm using CCSC version 3.178 and a Quickwriter. I've been using this setup for a few months, so I know it's working. I'm using a 16F87.

When I specify a #ROM command and read it with the Quickwriter, the data is always a full set of 0xFF. What am I doing wrong here?

I've checked the settings, and "Enable EE data" is indeed checked off.

Here's the line. I've tried several variations on the theme, and this is one of the lines that someone suggested on a previous thread involving #ROM.

[newguy]

Set the address to 0x2100 - that's the EEPROM address in the 16f's.

[theMagni]

That fixed it. Thanks.