CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support

LCD multiple Bar Graph Display

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
john cutler



Joined: 06 Sep 2003
Posts: 82
Location: Hot Tub, California

View user's profile Send private message

LCD multiple Bar Graph Display
PostPosted: Wed Jul 16, 2003 4:18 pm     Reply with quote

Does anyone have any recommendations for a small LCD display that could display 8 or 10 vertical low resolution bar graphs?
It needs to work in darkness with a backlight and also outside in sunlight. The resolution is not especially critical - it just needs to show relative control settings of audio levels, not actual audio. Consequently, it doesn't need really fast updates. It needs to be serially addressed - SPI or I2C.

I'd appreciate being steered in a good direction since I've never messed with LCD's before.

Thanks!

JC
___________________________
This message was ported from CCS's old forum
Original Post ID: 144516079
pez
Guest







Re: LCD multiple Bar Graph Display
PostPosted: Wed Jul 16, 2003 9:32 pm     Reply with quote

<a href="http://www.powertip.com.tw/product/pro_char.asp" TARGET="_blank">http://www.powertip.com.tw/product/pro_char.asp</a>

look at the one below or others to your liking.
it's compatable with the driver suplied with the compiler

PC1604-A
COB
87.0x60.0
56.20x20.80
2.95x4.75
3.55x5.35
S6A0069X*
1/16-1/4

None, EL, LED
TN, STN

enjoy
PEZ



:=Does anyone have any recommendations for a small LCD display that could display 8 or 10 vertical low resolution bar graphs?
:=It needs to work in darkness with a backlight and also outside in sunlight. The resolution is not especially critical - it just needs to show relative control settings of audio levels, not actual audio. Consequently, it doesn't need really fast updates. It needs to be serially addressed - SPI or I2C.
:=
:=I'd appreciate being steered in a good direction since I've never messed with LCD's before.
:=
:=Thanks!
:=
:=JC
___________________________
This message was ported from CCS's old forum
Original Post ID: 144516084
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group