CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
USB enumeration with PIC18F66J50

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
[email protected]



Joined: 27 Nov 2014
Posts: 1

View user's profile Send private message

USB enumeration with PIC18F66J50
PostPosted: Thu Nov 27, 2014 12:45 pm     Reply with quote
I have just gotten my PIC18F66J50 to successfully show up as a USB Input Device on my Windows 7 machine. I was expecting it to also show up as an HID device which is what I selected when using the PIC Wizard. I also entered a manufacturer string but it does not show up in the properties field.
I am using PCH 5.018. Any ideas? Thanks.

John
Ttelmah



Joined: 11 Mar 2010
Posts: 19549

View user's profile Send private message

PostPosted: Thu Nov 27, 2014 3:13 pm     Reply with quote
The manufacturer string does not come from the device!....

Basically it used to. But now what you see is what is reported by the INF file used. Will depend on the VID/PID.

An input device, would normally either be CDC, or HID. Sounds as if the device is being seen fine.
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group